Gemmy Holiday Light Show Tree Not Working

Vitrail: 8th episode - End of 1st season

Today ... end of the window!

First, smoothing the overlap areas: using a mini-spatula to fully retract the seals and crush one just above. After using a kind of plastic spoon to fold the wing of lead glass. The gesture must be flexible and smoothly. We finished preparing the pellets by brushing for thorough cleaning (dust lead glop = no: (next time I'll put a mask).

Then we prepare the welds. We put the brush "fat degreaser" (yes, I swear, it works, but I have not understood the trick ...) taking care of the well to penetrate between the wings that overlap. It's funny, fat dry cleaner in the lead ( grease dries?! really not understood the trick ...). Then Yapluka welding rods with large tin. I even states that where there was no aa fat, tin HOOK not. I'm not super-proud of my welds ... but hey it is not clear. Not hot enough it sticks the wand, it burns too hot lead, tin is not quite fragile, it is too big pate, patouille is dull and brittle ... Brief must be right first time!

Finally, the last weld. Now go back the window, but then very gently. And this post is taken from the beginning ... (Unless you've already read this sentence) And oh

victory was over! ... Well almost ...

just returned, Yann has been searched the small window. And second victory in the window returns the site! 1 mm less in width and 5 mm in height. As a black tape on the edges of the glass to have no light passing around the edges.
For fixing, we opted for making small spikes on the edges of the window, folded around the edge of the window. It is.
We raced the sun to see what it looked like ... but it was he who won


Click on the images! (The blue sky is an effect of the glass is white!)

PS: for orders, no delivery expected before 2012, given the number of things I already do to;)

Re PS: Thanks for all your comments, it's nice ...

Can Foot Drop Cause Edema

Vitrail - Episode 7

's it's over!
No, actually it's not true ... During more than I promise you my love! I've already talked about the next windows? ... Oops j'vous tell you later. And as

are 2 lame bored to their PC or Mac;) I will detail all you!

The implementation lead is complete. I find it much harder than the cutting of glass. We must measure properly prepare the pellets, which must be open and crush them to other places (but not too much because the glass must still return it). We must be careful tracking, and order of laying bits of glass to keep the stained glass. It must be said that if not maintained ... while on the lam (hence the small nails to hold the As). In short, not easy.

All this to realize that my last piece did not fit into the slot, then forced to "relax" the window (with the risk that a glass so the "throat" of lead or a lead sort of another in which it was made), to slide my last end. After
is closed with two strips of lead and fixed a clipboard to hold the assembly. Then taking measurements, 32.3 on one side, 32.5 on the other ... not good, then we unpins the board and he tapped with a mallet (not afraid) to "settle" the window.
When it's good, we nailed the board, it will move over to the welds.

Next week, beating and smoothing weights, then fitting the oil degreaser (not including the shot of the fat that removes grease), and welding this side. Then turning over (will have to be careful) and welding the other side. And finally fitting and admirage!

Ds Emulator Mac Pokemon Diamond

Before the sky falling on our head ...

I already mentioned, the firm is caught in a piece of wall instead not super strong ...
Let's say the elders (who knew what they were doing it for fame) have managed to get the chimney flue almost directly below that big beam that was happening already flush with the ridge of the barn! ! Result, it wanted much more on and it worked ... not top ...
Prior to taking the roof over his head, was cast a concrete base + scrap between the joists of the first floor. Then we put 2 posts (50mmx220mm), one on each side of the wall, connected by threaded rods to strengthen the whole. they disappear later in the dubbing. Not even afraid to poke holes in something already fragile ...
Normally this beam should not move, we hope. There's other stuff in the same style barn side, will deal with it first before attacking anything in this second part of the house ...
the left side view platform, and right next to barn, where we see a small leak in one of the joints of the chimney, one more line on the Todo list ...
Ok, 2 poles and 5 holes, it's not a full weekend, but I managed to badly twist my ankle (as that is the most stupid, go ...) So today, forced glandouille and TFW transition to hosto if it will be better. A week before the holidays when we had (finally) a little skiing ... Really great ...